Labjack USB Data Acquisition Series
Labjack Modules | Software | Documentation | Optional Accessories |
|
|||
|
LabJack
UE9 and UE9 Pro
|
To be informed of the latest news |
Analog InputsThe LabJack UE9 has 14 external analog inputs (AIN0-AIN13). AIN0-AIN3 are available on screw terminals and also on the DB37 connector. All 14 analog inputs are available on the DB37 connector. Each analog input can be configured individually as unipolar (four ranges from 0-5 volts to 0-0.625 volts) or bipolar (±5 volts). Analog input resolution is 12-bits at max speed (12 us conversion time), increasing up to 16-bits at slower speeds (2.7 ms conversion time). Analog inputs can be continuously streamed at up to 50 ksamples/second. Command/response (software timed) functions typically take a few milliseconds to execute. Analog OutputsThe LabJack UE9 has 2 analog outputs (DAC0 and DAC1) that are available both on screw terminals and the DB37 connector. Each analog output can be set to a voltage between 0 and 4.9 volts with 12-bits of resolution. Digital I/OThe LabJack UE9 has 23 digital I/O channels which can be individually configured as input, output-high, or output-low. 8 of these lines are called flexible digital I/O (FIO) and can be software configured as up to 6 timers and 2 counters. The first 4 FIO are available on screw terminals and the DB37 connector. All 8 FIO and 3 MIO are available on the DB37 connector, and 8 EIO and 3 CIO are available on the DB15 connector. TimersUp to 6 FIO can be configured as timers. The timers are very flexible, providing options such as PWM output, pulse timing, pulse counting, and quadrature input. CountersUp to 2 FIO can be configured as 32-bit counters. Power SupplyPower can be provided by the USB cable or an external 5 volt supply (included). When only Ethernet is connected, and an isolated power supply is used (such as the included wall-wart), the entire UE9 is electrically isolated. High Channel Count ApplicationsBy using USB hubs or Ethernet switches, many LabJacks can be interfaced to a single PC, providing an inexpensive solution for low-speed high channel count applications. Modbus Modbus is an industry standard command/response protocol for data acquisition and control equipment. The UE9 supports Modbus/TCP in hardware, so any software that supports Modbus/TCP can talk to the UE9 with no further software/drivers required. Wireless Data AcquisitionCombining the UE9 with a standard 802.11 wireless Ethernet bridge ($50-$200 from any computer retailer) provides inexpensive wireless data acquisition. Applications include high-speed continuous wireless data acquisition, long distance remote sensing and control, or PDA based data acquisition. Optional AccessoriesThe Labjack U3 has a number of optional accessories including terminal breakouts isolation and signal conditioning modules. Satisfaction GuaranteedEverything we sell has a 30-day money back guarantee. If, for any reason, you are not satisfied with a product, contact us to arrange your choice of a refund or replacement. In addition, the LabJack UE9 is covered by a 1-year limited warranty. |
|
Technical data subject to change at any time without notice. © 1993-2008 Total Turnkey Solutions. |